ZKTeco Access Control Kit SenseFace 2A Kit A
ZKTeco SenseFace 2A Kit A with L/Z brackets. Review named contents, component roles and terminal-revision requirements.
Price on request
Contact us for current availability and lead time.
Request pricing, availability and the right configuration for your project.
Overview
SenseFace 2A Kit A brings together a biometric access terminal and the listed hardware for a single-door access point. The supplier packing list identifies one SenseFace 2A with standard ID-card reading, one LM-2805 magnetic lock, a TLEB102 touchless exit button and ten ID cards. It also names an LMB-280L bracket and an LMB-280Z bracket. Those named pieces distinguish Kit A from the U-bracket arrangement in Kit B.
The manufacturer’s kit document corroborates this A-package structure and illustrates the L/Z arrangement for a wooden-door installation. The lock is the physical locking component, the terminal verifies an authorised credential, and the exit button supplies a separate request from inside. Fingerprint, facial, card and password methods are documented for the SenseFace 2A component, using a 2.4-inch colour screen, physical keypad and one-megapixel binocular camera.
The supplier lists a 300 × 276 × 93 mm kit size; that is a package dimension rather than the terminal’s mounting footprint. Door material, frame geometry and cable routing still determine whether the specified brackets can be fitted. The dated manufacturer kit profile and the current Entry/Standard terminal profiles are different references, so the exact terminal revision should be matched before relying on biometric limits. Treat this record as the listed A arrangement, with the power design, software and any additional site requirements specified alongside it.
Applications & Use Cases
- Lock-state feedback in a monitored opening: The LM-2805 component table documents NO/COM/NC feedback contacts. They can supply the relevant status signal to a designed monitoring arrangement; those lock-feedback contacts are distinct from the TLEB102 exit-request contacts.
Product FAQs
Which biometric capacity applies to the terminal in this kit?
The dated kit datasheet specifies 1,500 faces and 3,000 fingerprints. The current global terminal page separates Entry and Standard profiles with different limits. The packing list alone does not resolve the fitted generation. Match its hardware and firmware before selecting an enrolment capacity.
Can the supplied ID cards be replaced by any 13.56 MHz credential?
The kit package table identifies ten 125 kHz EM cards. A 13.56 MHz IC terminal module is optional. Match the terminal module and exact card technology rather than assuming a standard-ID kit accepts every IC credential.
What presentation distance does the exit sensor use?
The exact kit document specifies infrared sensing from 2 to 10 cm for TLEB102. Its contacts are NO/NC/COM and its listed switching voltage is DC 9–16 V. Plan the exit request around that sensor and the applicable door wiring.
Does the LM-2805 name establish a 280 kg verified holding force?
The kit document is inconsistent: its package text calls it a 280KG lock and describes 200–220 kg closing force, while the component table specifies 200 kg ±5% tensile strength. Do not treat the largest label as a reconciled strength guarantee; match the required lock specification to an applicable manufacturer revision.
Does the terminal’s power rating cover the entire door kit?
The dated kit profile specifies 12 V DC, 1.5 A for the terminal and separately lists the LM-2805 lock at 12 V DC, 450 mA ±5%. These are component requirements, not a complete shared-supply design or proof of an included power unit. Size the actual door system accordingly.
Specifications
| Manufacturer | ZKTeco |
|---|---|
| Model | SenseFace 2A Kit A |
| Supplier description | Packing List in the Kit SenseFace 2A*1 (300027987 Standard ID Card) -Electric Magnetic lock, 300008768 LM-2805 *1 |
| Touchless Exit Button | 200025180 TLEB102 *1 |
| Card | 100007240 ID Card * 10 - SenseFace 2A Kit A Lock Bracket 300008785 LMB-280L *1 300008790 LMB-280Z *1 |
| Kit Dimensions | 300*276*93 mm |
Downloads
Manufacturer documents and Royal Link product sheets. Check the publisher and configuration notes for each file. PDFs open in a new tab.
| Document | Type | Size | Updated / version | Action |
|---|---|---|---|---|
| PDFSenseFace 2A Kit A — supplier packing list; terminal revision and component limitations applyRoyal Link Technologies LtdSupplier catalogue specifications | Product sheet | 181 KB | 2026-10-30 | Download |
Customer reviews
Your experience helps others choose the right solution.
You may also like
Explore more from this product range.
Reviews
No reviews yet
Be the first to share your experience with this product.