ZKTeco SenseFace 2A Kit B Access Control Kit
ZKTeco SenseFace 2A Kit B with U bracket. Review named contents, component roles and terminal-revision requirements.
Price on request
Contact us for current availability and lead time.
Request pricing, availability and the right configuration for your project.
Overview
This supplier-listed SenseFace 2A Kit B record combines the credential terminal with the listed lock and exit components. It contains a standard-ID SenseFace 2A, one LM-2805 magnetic lock, one TLEB102 touchless exit button and ten ID cards. Its mounting component is a single LMB-280U bracket, corresponding to the B package in ZKTeco’s dated kit document.
The U-bracket arrangement is shown for a glass-door scenario. The kit letter therefore describes a mounting difference, rather than a documented increase in biometric capacity over Kit A. Verify the actual glass, frame, bracket fit and cable route at the intended opening. The SenseFace 2A component authenticates face, fingerprint, RFID card or password, while the magnetic lock holds the door and the infrared exit button provides a separate request from inside.
The supplier lists 300 × 276 × 93 mm as the package dimension. Individual terminal and lock dimensions are separate measurements when planning the installation. The exact terminal revision also matters: current Entry and Standard definitions differ from the legacy kit’s published biometric profile. A matching model label and applicable specification are needed before relying on a particular enrolment limit. This record retains the named B contents and its supplier identity, with electrical provision, software integration and any additional door equipment to be defined in the project specification.
Applications & Use Cases
- Lock-state feedback in a monitored opening: The LM-2805 component table documents NO/COM/NC feedback contacts. They can supply the relevant status signal to a designed monitoring arrangement; those lock-feedback contacts are distinct from the TLEB102 exit-request contacts.
Product FAQs
Which biometric capacity applies to the terminal in this kit?
The dated kit datasheet specifies 1,500 faces and 3,000 fingerprints. The current global terminal page separates Entry and Standard profiles with different limits. The packing list alone does not resolve the fitted generation. Match its hardware and firmware before selecting an enrolment capacity.
Can the supplied ID cards be replaced by any 13.56 MHz credential?
The kit package table identifies ten 125 kHz EM cards. A 13.56 MHz IC terminal module is optional. Match the terminal module and exact card technology rather than assuming a standard-ID kit accepts every IC credential.
What presentation distance does the exit sensor use?
The exact kit document specifies infrared sensing from 2 to 10 cm for TLEB102. Its contacts are NO/NC/COM and its listed switching voltage is DC 9–16 V. Plan the exit request around that sensor and the applicable door wiring.
Does the LM-2805 name establish a 280 kg verified holding force?
The kit document is inconsistent: its package text calls it a 280KG lock and describes 200–220 kg closing force, while the component table specifies 200 kg ±5% tensile strength. Do not treat the largest label as a reconciled strength guarantee; match the required lock specification to an applicable manufacturer revision.
Does the terminal’s power rating cover the entire door kit?
The dated kit profile specifies 12 V DC, 1.5 A for the terminal and separately lists the LM-2805 lock at 12 V DC, 450 mA ±5%. These are component requirements, not a complete shared-supply design or proof of an included power unit. Size the actual door system accordingly.
Specifications
| Manufacturer | ZKTeco |
|---|---|
| Model | SenseFace 2A Kit B |
| Configuration | Supplier-listed configuration |
| Terminal | 1 × SenseFace 2A (300027987, standard ID card) |
| Magnetic lock | 1 × LM-2805 (300008768) |
| Touchless exit button | 1 × TLEB102 (200025180) |
| ID cards | 10 × ID card (100007240) |
| Lock bracket | 1 × LMB-280U (300008788) |
| Kit dimensions | 300 × 276 × 93 mm |
Downloads
Manufacturer documents and Royal Link product sheets. Check the publisher and configuration notes for each file. PDFs open in a new tab.
| Document | Type | Size | Updated / version | Action |
|---|---|---|---|---|
| PDFSenseFace 2A Kit B — supplier packing list; terminal revision and component limitations applyRoyal Link Technologies LtdSupplier catalogue specifications | Product sheet | 182 KB | 2026-10-30 | Download |
Customer reviews
Your experience helps others choose the right solution.
You may also like
Explore more from this product range.
Reviews
No reviews yet
Be the first to share your experience with this product.