ZKTeco Access Control Kit SenseFace 2A Kit C
ZKTeco SenseFace 2A Kit C with monitor and doorbell. Review named contents, component roles and terminal-revision requirements.
Price on request
Contact us for current availability and lead time.
Request pricing, availability and the right configuration for your project.
Overview
SenseFace 2A Kit C adds indoor communication components to the listed L/Z-bracket access package. The supplier identifies one ID/Wi-Fi SenseFace 2A terminal, an LM-2805 magnetic lock, a TLEB102 touchless exit button, ten ID cards and LMB-280L plus LMB-280Z brackets. It also lists a WDB04 wireless doorbell and a VT07-B01-W smart indoor monitor. Those additional devices distinguish this C record from Kits A and B.
ZKTeco’s dated kit document corroborates the C package’s lock, exit, cards, L/Z brackets and WDB04, but names the monitor VT07-B01. The supplier’s wireless-monitor suffix should therefore be retained as a configuration distinction. The terminal component offers facial, fingerprint, card and password verification, while the separate monitor and doorbell serve the visitor-contact workflow. An indoor monitor is not an additional biometric enrolment terminal.
The listed 420 × 371 × 93 mm kit size is a package measurement. Plan mounting, wiring and power for the terminal, lock and monitor individually. The older kit document and current terminal page also use different intercom descriptions: current documentation distinguishes private TCP/IP from standard-SIP pairings. Match the actual supplied terminal revision, firmware and monitor protocol before selecting this package for an existing intercom system. The C packing list describes the named arrangement; it does not establish included software licences, storage media or a complete site installation.
Applications & Use Cases
- Lock-state feedback in a monitored opening: The LM-2805 component table documents NO/COM/NC feedback contacts. They can supply the relevant status signal to a designed monitoring arrangement; those lock-feedback contacts are distinct from the TLEB102 exit-request contacts.
Product FAQs
Which biometric capacity applies to the terminal in this kit?
The dated kit datasheet specifies 1,500 faces and 3,000 fingerprints. The current global terminal page separates Entry and Standard profiles with different limits. The packing list alone does not resolve the fitted generation. Match its hardware and firmware before selecting an enrolment capacity.
Does the supplied monitor use the current standard-SIP pairing?
The older kit calls VT07-B01/B01-W SIP-compatible. The current terminal table instead lists them under the private TCP/IP arrangement and names VT07-B22L/B26L-W for standard SIP. Confirm the actual firmware and protocol; the supplier’s B01-W suffix alone does not resolve this document conflict.
What presentation distance does the exit sensor use?
The exact kit document specifies infrared sensing from 2 to 10 cm for TLEB102. Its contacts are NO/NC/COM and its listed switching voltage is DC 9–16 V. Plan the exit request around that sensor and the applicable door wiring.
Does the LM-2805 name establish a 280 kg verified holding force?
The kit document is inconsistent: its package text calls it a 280KG lock and describes 200–220 kg closing force, while the component table specifies 200 kg ±5% tensile strength. Do not treat the largest label as a reconciled strength guarantee; match the required lock specification to an applicable manufacturer revision.
What are the doorbell’s power and wireless requirements?
The kit datasheet lists WDB04 at 433.92 MHz, powered by three AA cells at 4.5 V, with four adjustable volume levels. That frequency is separate from the terminal’s Wi-Fi. The source describes reception up to 8 m, not a guaranteed distance through every wall or installation.
Specifications
| Manufacturer | ZKTeco |
|---|---|
| Model | SenseFace 2A Kit C |
| Supplier description | Packing List in the Kit SenseFace 2A*1 (300027990 Standard ID/WiFi) -Electric Magnetic lock, 300008768 LM-2805 *1 |
| Touchless Exit Button | 200025180 TLEB102 *1 |
| Card | 100007240 ID Card * 10 - WDB04 Wireless Doorbell * 1 - VT07-B01-W Smart IP Video Indoor Monitor * 1 - SenseFace 2A Kit C Lock Bracket 300008785 LMB-280L *1 300008790 LMB-280Z *1 |
| Kit Dimensions | 420*371*93 mm |
Downloads
Manufacturer documents and Royal Link product sheets. Check the publisher and configuration notes for each file. PDFs open in a new tab.
| Document | Type | Size | Updated / version | Action |
|---|---|---|---|---|
| PDFSenseFace 2A Kit C — supplier packing list; terminal revision and component limitations applyRoyal Link Technologies LtdSupplier catalogue specifications | Product sheet | 187 KB | 2026-10-30 | Download |
Customer reviews
Your experience helps others choose the right solution.
You may also like
Explore more from this product range.
![ZKTeco USB Fingerprint and Card Reader ZK8500R[MF]](https://royallink.co.ke/wp-content/uploads/2026/10/rl-hq-6cff3dd191dc137646d4.webp)
![ZKTeco Fingerprint Reader ZK8500R[ID]](https://royallink.co.ke/wp-content/uploads/2026/10/rl-hq-8448a4fba2d8ee5ee0ea.webp)
Reviews
No reviews yet
Be the first to share your experience with this product.