ZKTeco Access Control Terminal X10
ZKTeco X10 fingerprint, dual-frequency card and PIN access device. Review Zlink connectivity, 500-user capacity and the unresolved Wiegand-direction distinction.
Price on request
Contact us for current availability and lead time.
Request pricing, availability and the right configuration for your project.
Overview
The ZKTeco X10 is a compact standalone access device that verifies fingerprints, RFID cards and numeric passwords. Its touch keypad, status LEDs and buzzer provide the local interaction, rather than a large screen. The current manufacturer profile specifies 500 users, 500 fingerprint templates and 500 cards as separate standard limits. Those capacities describe different records within the terminal and should not be added into a larger claimed user population.
Both 125 kHz ID and 13.56 MHz IC card technologies are listed as standard. Fingerprint matching is specified below 0.3 seconds, describing the verification step rather than the complete time needed to open and pass through a door. The physical housing is zinc alloy, measures 160 by 45 by 22 millimetres and carries a manufacturer IP66 ingress-protection rating. Its narrow wall-mounted format allows the access point to be planned around the available mounting width.
Wi-Fi at 2.4 GHz and Bluetooth 5.0 connect the device to the documented ZKBio Zlink mobile-app arrangement. The manufacturer describes authorised remote door unlocking through that connected system. Local connections are provided for an electric lock, door sensor, exit button and doorbell. These interfaces connect separately specified door equipment; they do not establish what the supplier package contains. Assess the required user population, mobile administration and actual door wiring together before selecting X10 for an installation.
Applications & Use Cases
- Interpreting access-point status: The documented indicators distinguish orange programming mode, green successful verification and red standby or failed verification, with a three-beep error indication. These cues help an operator distinguish a configuration action from an ordinary credential attempt.
Product FAQs
Does X10 provide a stated local transaction-storage capacity?
The table marks transaction capacity N/A and refers to cloud synchronisation through ZKBio Zlink. It does not establish a large local attendance archive. Specify event retention against the actual connected application and firmware.
Can password length be adjusted?
The manufacturer specifies six to ten numeric digits, with six as the factory default. Align the configured length with the site’s access policy and do not confuse password length with the number of enrolled users.
Can its Wiegand port be assumed to output credentials to any controller?
The overview mentions reader operation, but the current communication row specifically says 26–44-bit Wiegand input. This direction discrepancy remains unresolved. Obtain the applicable manual, firmware and confirmed direction before specifying controller-reader output.
What electrical input is stated for the device?
The current specification is DC 12 V, 0.15 A. This is the terminal’s stated input; size the complete door power arrangement separately for the actual lock and other connected equipment.
What ambient limits accompany its enclosure rating?
The manufacturer lists minus 25 to 60°C and 10–90% non-condensing relative humidity. Check both ambient conditions and installation requirements; an ingress rating alone does not describe every mounting environment.
Specifications
| Manufacturer | ZKTeco |
|---|---|
| Model | X10 |
| Manufacturer part number | AC01-FL40H-01 |
| Authentication Method | Fingerprint / Card / Password (Physical Touch Keypad ) |
| User Capacity | 500 (1:N) (Standard ) |
| Card Capacity | 500 (1:N) (Standard ) |
| Fingerprint Template Capacity | 500 (1:N) (Standard) |
| Transaction Capacity | N/A (Cloud sync via ZKBio Zlink) |
| Max. User Password Length | Support 6 to 10 Digit number (Factory Default: 6 digits) |
| Biometric Verification Speed | less than 0.3 sec (Fingerprint) |
| False Acceptance Rate (FAR) % | FAR ≤ 0.0001% |
| False Rejection Rate (FRR) % | FRR ≤ 0.01% |
| Card Type | ID & IC Card @125 kHz &13 .56 MHz (Standard) |
| Communication | 2.4 GHz Wi-Fi, Bluetooth 5.0; current table lists Wiegand 26–44-bit input. Overview mentions reader operation; output direction requires exact firmware/manual confirmation. Lock, door sensor, exit button and doorbell connections. |
| Standard Functions | Access Control, Buzzer, Multiple Verification Methods, LED status indicators: Orange: Programming Green:Verification successful Red: Standby,Verification Fail 3 Beeps Operation Error: 3 Beeps; No Indicator |
| Power Supply | DC 12V 0 .15A |
| Operating Temperature | -25°C to 60°C |
| Operating Humidity | 10% to 90% RH (Non-condensing) |
| Dimensions | 160mm*45mm*22mm (L*W*H) |
| Gross Weight | 0.46Kg |
| Net Weight | 0.37Kg |
| Supported Software | Mobile APP: ZKBio Zlink |
| Installation | Wall-mount |
| Housing Material | Zinc Alloy |
| Ingress Protection Rating | IP66 (waterproof and dustproof ) |
| Certifications | ISO14001, ISO9001, CE, Equivalent to RoHS |
Downloads
Manufacturer documents and Royal Link product sheets. Check the publisher and configuration notes for each file. PDFs open in a new tab.
| Document | Type | Size | Updated / version | Action |
|---|---|---|---|---|
| PDFX10 - Royal Link product sheetRoyal Link Technologies LtdSupplier catalogue specifications | Product sheet | 151 KB | 2026-10-30 | Download |
Manufacturer references
Customer reviews
Your experience helps others choose the right solution.
You may also like
Explore more from this product range.
Reviews
No reviews yet
Be the first to share your experience with this product.