ZKTeco Access Control Terminal F22 — Supplier configuration: F22(ZLM60)
ZKTeco F22 ZLM60 supplier configuration with Z-ID fingerprint sensor and Wi-Fi. Review slim dimensions, optional features and exact firmware/software applicability.
Price on request
Contact us for current availability and lead time.
Request pricing, availability and the right configuration for your project.
Overview
The ZKTeco F22 is a slim fingerprint access and attendance terminal with a 2.4-inch colour display and touch keypad. Its Z-ID sensor and ZKFinger V10.0 algorithm provide the documented fingerprint-verification arrangement. At 158.5 by 78 by 19.4 millimetres, the enclosure is notably shallow, making its physical dimensions a useful comparison when planning a wall-mounted replacement.
The global manufacturer profile lists 3,000 fingerprints under an optional-capacity heading, 5,000 optional ID or MIFARE cards and 30,000 transactions. These separate limits should be matched to the fitted configuration, rather than adding them into a combined user capacity. The supplier identifies a ZLM60 configuration and describes standard access PUSH, whereas the global software row names Standalone SDK and ZKBio Access IVS. The exact supplied firmware and its applicable software therefore remain a selection point.
Wi-Fi and TCP/IP provide network paths, while USB host and the listed serial interfaces serve their documented data or peripheral roles. F22 supports standalone installation or use with a third-party access controller accepting the appropriate standard Wiegand signal. Wiegand input and output are explicitly listed, alongside lock, door-sensor, exit-button and alarm connections. These interfaces support a designed door installation; they do not establish supplied door hardware. Identify the receiving software, terminal firmware and exact card option before treating this record as a direct replacement for an installed unit.
Applications & Use Cases
- Local event and schedule handling: Record query, scheduled-bell, anti-passback and ADMS are documented functions. They support a configured access or clocking workflow, while the receiving software determines how collected events are reported and used.
Product FAQs
Are a 14-digit user ID and automatic status switching standard?
The current manufacturer table marks both the 14-digit ID function and automatic status switching optional. The earlier supplier row presented them together with standard functions; the visible row now distinguishes their optional status.
Does the optional card list establish FeliCa support for this unit?
The global F22 table names optional ID or MIFARE cards. The supplier row also mentioned FeliCa, but the current exact-model source does not corroborate that supplied option. Obtain a matching module specification if FeliCa is required.
What is the auxiliary input intended to support?
The manufacturer lists one auxiliary input for a linkage function. Define the external device and configured response against the applicable installation documentation; the input label alone does not establish a specific sensor or peripheral is included.
Can any listed serial port be treated as an included printer system?
Printer support is optional and the RS232/RS485 entries carry manufacturer footnote markers. Confirm the exact peripheral, connection and firmware before specifying a printer; the terminal listing does not establish a supplied printer.
What electrical and ambient limits should be checked at installation?
The global profile specifies 12 V DC, 3 A, operation at 0–45°C and 20–80% relative humidity. These are operating limits, not proof of an exposed-outdoor enclosure rating. Compare them with the actual mounting conditions and supplied-unit documentation.
Specifications
| Manufacturer | ZKTeco |
|---|---|
| Model | F22 |
| Configuration | Supplier configuration: F22(ZLM60) |
| Communication | Wi-Fi, TCP/IP, USB host, RS232/485 |
| Fingerprint Capacity | 3,000 in manufacturer table under optional-capacity heading; match fitted configuration. |
| Card Capacity(Optional) | 5000 |
| Record Capacity | 30, 000 |
| Standard Functions | Z-ID sensor, record query, T9 input, anti-passback, scheduled bell and ADMS in manufacturer profile. Automatic status switching and 14-digit user ID are optional. Supplier AC PUSH claim requires exact firmware confirmation. |
| Optional | Manufacturer: printer, ID or MIFARE card options. Supplier FeliCa option not corroborated by current exact-model page; matching card-module evidence required. |
Downloads
Manufacturer documents and Royal Link product sheets. Check the publisher and configuration notes for each file. PDFs open in a new tab.
| Document | Type | Size | Updated / version | Action |
|---|---|---|---|---|
| PDFF22 (ZLM60 supplier configuration) — earlier supplier sheet; firmware/options and revision require confirmationRoyal Link Technologies LtdSupplier catalogue specifications | Product sheet | 164 KB | 2026-10-30 | Download |
Manufacturer references
Customer reviews
Your experience helps others choose the right solution.
You may also like
Explore more from this product range.
Reviews
No reviews yet
Be the first to share your experience with this product.