ZKTeco SpeedFace-V5L[QR] — Supplier Configuration Without Palm

This SpeedFace-V5L[QR] supplier configuration is explicitly listed without palm recognition or a fingerprint sensor. It retains facial verification and the dedicated QR module documented for the exact V5L[QR] model. The manufacturer links its dynamic-code workflow to the ZKBio CVAccess mobile application. This is different hardware from the base V5L’s optional camera-based code function.

The supplier lists 10,000 faces, 200,000 transactions and a 10,000-card profile marked optional in its record. The current family document makes 125 kHz ID reading standard for the QR model, so the exact supplied reader configuration should be matched rather than interpreting a storage figure as a complete card-technology specification. Its stated 512 MB RAM and 8 GB ROM fit the manufacturer’s no-palm hardware profile. A five-inch display and two-megapixel WDR binocular camera provide interaction and facial capture.

TCP/IP, Wiegand input/output and ZKTeco RS485 support their documented network and reader roles, alongside lock, sensor, alarm, exit-button and auxiliary connections. The supplier gives an operating range of 0–45°C, while the current family specifies minus 10–45°C; resolve the applicable revision before selecting a colder site. The intended software role also determines the firmware protocol. Preserve this record’s explicit no-palm configuration and select the actual card module, enabled code workflow and door hardware together, rather than adding optional family hardware to the supplier package.