ZKTeco Full-height Turnstile FHT2311D
ZKTeco FHT2311D dual-passage RFID access-control configuration. Review exact controller mapping,580 mm lane and unresolved installation revision differences.
Price on request
Contact us for current availability and lead time.
Request pricing, availability and the right configuration for your project.
Overview
The ZKTeco FHT2311D is the RFID access-control configuration in its exact manufacturer series. Its dual-passage structure provides two 580 mm pedestrian lanes within a shared full-height assembly. The D suffix must be preserved when comparing its physical layout with the smaller single-passage models.
The published assembly plan is 2018 by 1397 millimetres, with a 2220 mm height in the model datasheet. The shared 2024 manual instead gives 2200 mm height, so the actual installation drawing must resolve that difference before overhead clearances or fixing work are committed. The plan dimensions describe the whole structure rather than the clear pedestrian opening. The D-series source separates turnstile and cabinet weights, which should be retained as separate transport components.
SUS304 stainless steel is specified for the cabinet and barrier, with SUS316 optional for the barrier. LED indicators provide passage guidance. The documented platform rates are a maximum 20 people per minute for RFID and 15 for fingerprint; these depend on the actual authentication arrangement and are not proof that both methods are fitted to every model. The manufacturer configuration mapping establishes the included equipment category, while the exact reader models, credential population, software licence and supplied revision remain parts of the complete access-system specification.
Applications & Use Cases
- Configuring one-way or two-way passage: The applicable full-height manual documents both-direction passage, right-only, left-only or both-directions-forbidden settings. Configure the physical direction and the access-controller policy together for the actual FHT2311D installation.
Product FAQs
Which controller and readers does the manufacturer actually map to FHT2311D?
The exact 2024 manual maps FHT2311D to C3-400 with four RFID readers. Match the supplied revision and reader models; the mapping does not establish every card technology or an included host-software licence.
Does IP54 establish suitability for an unsheltered or coastal location?
The datasheet says indoor/outdoor, but the applicable 2024 manual specifies outdoor use if sheltered. The datasheet also advises against highly corrosive locations such as the seaside, chemical plants and saline-alkali soil. Assess the exact installation and material option; IP54 alone does not cancel those source limitations.
Does the stainless assembly remove the need for routine maintenance?
No. The applicable full-height manual calls for cleaning along the surface grain and movement lubrication after isolating power. It also requires professional personnel for movement and electrical maintenance. The stated one-million-cycle MCBF figure does not establish maintenance-free operation or Royal Link servicing cover.
Can an accepted passage remain available indefinitely?
The applicable manual provides an opening-duration setting from five to 60 seconds, with five seconds as the documented default. Configure the intended passage window for FHT2311D; an accepted credential does not establish an unlimited opening period.
Will a successful credential automatically propel someone through the rotor?
The exact manual says authorisation releases the solenoid and the pedestrian pushes the rod to pass. This is a controlled mechanical passage, not evidence of a powered conveyor-like movement or an automatic speed-gate flap. Preserve that operating distinction when selecting the entrance equipment.
Specifications
| Manufacturer | ZKTeco |
|---|---|
| Model | FHT2311D |
| Power Requirements | AC110V / 220V, 50 / 60Hz |
| Working Temperature | -28°C to 60°C |
| Working Humidity | 0% to 95% |
| Working Environment | Datasheet: Indoor/Outdoor. Applicable2024 manual: outdoor only if sheltered; avoid highly corrosive sites per datasheet. |
| Speed of Throughput | RFID：Maximum 20/minute Fingerprint：Maximum 15/minute |
| Lane Width (mm) | 580 ( mm ) |
| Footprint (mm*mm) | 2018 * 1397 ( mm ) |
| Dimension (L*W*H) | 2018 × 1397 mm plan. Datasheet height 2220 mm;2024 manual 2200 mm. Matching supplied installation drawing required. |
| Net Weight (kg) | Turnstile : 161.5kg Cabinet : 271.5kg |
| LED Indicator | Supports |
| Cabinet Material | SUS304 Stainless Steel |
| Barrier Material | SUS304（optional: SUS316） |
| Barrier Movement | Rotating |
| Emergency Mode | Supports |
| Security Level | High |
| MCBF | 1 million |
| Ingress Protection | IP54 |
| Dimension with Packing (L*W*H) | Turnstile：2120*590*440(mm) Cabinet：1670*1510*2180(mm) |
Downloads
Manufacturer documents and Royal Link product sheets. Check the publisher and configuration notes for each file. PDFs open in a new tab.
| Document | Type | Size | Updated / version | Action |
|---|---|---|---|---|
| PDFZK Full Height Turnstile User Manual v1.4 20240604ZKTeco | User manual | 1.58 MB | 2024-06-13 | Download |
| PDFFull Height Turnstile Series Installation Guide EN v1.1 20220708ZKTeco | Installation guide | 16.53 MB | 2023-01-05 | Download |
| PDFFHT2300DZKTeco | Product document | 429 KB | 2022-07-04 | Download |
Manufacturer references
Customer reviews
Your experience helps others choose the right solution.
You may also like
Explore more from this product range.
Reviews
No reviews yet
Be the first to share your experience with this product.